5 Tonne Cable Pulling Winch OMAC UP50-B – Light Version with 18.8 kW Diesel Engine
The OMAC UP50-B Light Version is a professional, mobile cable pulling winch designed for the installation of underground cable networks, power cables, telecommunications cables and fibre optic cables. The machine is designed for pulling a single rope and is suitable for cable network construction, modernisation and maintenance work.
This configuration of the OMAC UP50 is equipped with an 18.8 kW (25 HP) diesel engine and provides a maximum pulling force of 50 kN, equivalent to approximately 5 tonnes. Compared with the standard UP50 version equipped with a 36 kW engine, this configuration offers a lower pulling speed under high loads. It is a suitable solution for companies looking for a professional cable pulling winch with a pulling force of up to 5 tonnes and a lighter engine configuration.
The machine is fitted with a Stage V diesel engine, without DPF and AdBlue.
Main Technical Specifications – OMAC UP50-B
- Maximum pulling force: 50 kN (approximately 5 tonnes)
- Maximum pulling speed: 80 m/min
- Pulling speed at maximum pulling force: 7 m/min
- Capstans: 2 × Ø 250 mm
- Maximum rope diameter: Ø 14 mm
- Engine: Yanmar or Kohler diesel
- Engine power: 18.8 kW (25 HP)
- Engine cooling: liquid cooling
- Machine weight without rope: 1,700 kg
- Dimensions: 450 × 180 × 160 cm
- EU road approval for speeds up to 80 km/h
Hydraulic Drive and Precise Control
The OMAC UP50-B cable pulling winch uses a hydraulic drive system that allows smooth adjustment of the pulling speed. The machine is operated via the DEG 4.0 control panel and a wired remote control, allowing the operator to monitor and control the cable pulling process.
Two steel capstans with a diameter of 250 mm guide the pulling rope and transmit the pulling force. Manufactured from solid steel, the capstans are designed to provide high mechanical strength during demanding operations.
Standard Equipment
The OMAC UP50-B is equipped for professional use on cable installation sites. Standard equipment includes:
- Lightweight and compact construction with a fully metal housing, high-quality paint finish and easy access to spare parts
- User-friendly DEG 4.0 control panel with smooth electronic adjustment of pulling speed
- Strain-gauge pulling force measurement system with an accuracy of 1–3%
- Hydraulic negative brake preventing uncontrolled rope return
- 360° adjustable rope guide roller
- IP65 protection for components
- Machine grounding, surge protection and emergency stop switch
- Four-point anchoring system and central lifting eye
- Four fully galvanised, mechanically adjustable stabilising supports; rear supports feature an adjustable inclination angle
- Hydraulic oil temperature and level indicators
- Enlarged oil cooler in the hydraulic circuit
- Reliable rope winding mechanism consisting of a diamond-pattern shaft and heavy-duty rope guide
- Automatic rope winding system with removable drum
- Maintenance system designed to simplify servicing within 60 minutes
- Stainless steel tool box
- Wired remote control with a 10 m cable (037.2)
- Approved chassis with suspension axle, braking system, overrun brake and handbrake (006.4)
- Adjustable drawbar with jockey wheel and a choice of ball hitch or eye coupling
- Removable rear crossbar with number plate holder and LED lighting
DEG 4.0 Electronic Control and Data Recording System
The OMAC UP50-B uses the electronic DEG control system. An electronic data recorder with a USB port for saving operating data is available as option 069.2.
Depending on the selected equipment, the system provides functions such as:
- Display of pulling force and pulling speed
- Real-time recording of the pulled rope or cable length
- Electronic setting of the maximum permitted pulling force
- Display of operating hours, error notifications and upcoming maintenance requirements
- Saving and storing operating data on a USB memory device
- Possibility of connecting a portable printer
The machine can also be equipped with the optional OLS system, which provides remote machine control, Wi-Fi connectivity, GPS geolocation, fault detection and other monitoring functions.
Steel Rope Drum Capacity
The rope storage capacity of the OMAC UP50-B depends on the diameter of the steel rope used:
- Ø 10 mm steel rope – 1,500 m
- Ø 12 mm steel rope – 1,000 m
- Ø 14 mm steel rope – 800 m
The steel rope is not included in the standard delivery.
The machine is designed for use with the following rope models:
Warranty
- Diesel engine: up to 5 years manufacturer’s warranty
- Hydraulic system: 2 years manufacturer’s warranty
Optional Equipment and Accessories
Depending on the user’s requirements, the OMAC UP50-B can be supplied with additional equipment:
- 038 – Radio remote control (maximum operating range 50 m)
- 051.3 – Rubber track drive system
- 038.C – Radio remote control for the tracked drive system
- 067 – Telescopic boom for underground cable installation
- 069.5 – Printer with accessories and carrying case
- 027.2 – Composite fibreglass housing, resistant to dirt and corrosion
- Custom housing colour on request
OMAC UP50-B – Professional Cable Pulling Winch for Underground Cable Installation
The OMAC UP50-B is a professional solution for companies involved in the construction and modernisation of power distribution networks, telecommunications networks and fibre optic infrastructure.
Its hydraulic drive, electronic pulling force measurement system and wide range of optional equipment allow the machine to be configured to meet the requirements of different cable installation projects.
AP Energy supplies OMAC Italy cable pulling winches, provides technical advice and assists customers in selecting the appropriate optional equipment and accessories for professional cable installation work.
The machine is manufactured in accordance with the ISO 9001 quality management standard and is supplied with an EC Declaration of Conformity and CE marking.





Reviews
There are no reviews yet.