Two-way vehicle for the installation of catenery network OMAC ITALY CT.40.2

Two-way vehicle for the installation of the railway traction network OMAC ITALY CT.40.2

Two-way OMAC Italy assembly unit for the installation of catenery with the for 2 (two) overhead contact lines or contact wires is an extremely useful tool that greatly facilitates the process of hanging the overhead contact line.

Our system on the platform ensures automatic installation of traction networks with a maximum force of 40kN (20kN+20kN), which allows precise setting of the appropriate tension. This is very important in the case of overhead contact lines because incorrect tension can lead to breakdowns or other dangerous situations.

Automatic tensioning and winding unit for 2 (two) traction or contact wires simultaneously or independently. The traction network assembly platform is equipped with a control panel for maximum control of the entire process.

Constant tensioning/tensioning unit, suitable for mounting 2 (two) suspension lines/contact lines simultaneously or independently with 2 (two) hydraulic circuits, equipped with 2 (two) reel stands.

Optional capstan equipment:

045.2.2 Automatic hydraulic pressure rollers on capstan grooves
045.3.2 Manual pressure rollers on capstan grooves
118.2 Bidirectional: Hydraulic tensioning circuits designed to be tensioned in both directions
114.2 Electronic tension force reading system, tension accuracy ± 1% – ± 5% of full scale value
142.2 Device for terminating the tensioning operation even in the event of a diesel engine failure, with free-running capstans
143.2 Mandatory option. 142.1, enables the pulling operation to be performed with a rope tension force of approximately 500 daN
160.2 Compensating device to hold the last length of rope in tension by means of a winch with 60 m of rope

Optional accessories for the stand set:

455 Automatic movement of the reel stand to reduce the angle of the cable from the reel to the capstan

Hydraulic system and combustion engine options:

A. R.I.G. Engine with automatic regeneration of the DPF exhaust system – Stage V

Optional equipment for the cabin and control panel:

107 + 107.1 GPS connection system for remote machine inspection 108 Air conditioning in the cabin
108.1 Cabin heating system
108.2 Air conditioning and cabin heating installation
038 Radio remote control of all main tensioning functions (max. 50 m)
CAB2 Cab length 2,000 mm (Alternative to standard cab 1,400 mm)
CAB3 Cab length 2,400 mm (Alternative to standard cab 1,400 mm

Optional equipment for booms and pantographs:

207.2 Telescopic arm with guide rollers. Height when closed: 2,230 mm, extension 1,200 mm from the base platform
131.1 Telescopic and swinging main mast with guides with nylon rollers for (1) wire. Height when closed: 2,480 mm, height when open: 5,250 mm (from the base platform). Deflection from the center of the rail +/- 500 mm
131.5 Extension 1.375 mm, for option 131.1 with guide rollers for 1 wire/cable, opening height 6.625 mm. Tilt from center +/- 800 mm 131.1.2 Telescopic and swinging main mast with nylon rollers for (2) ropes. Height when closed: 2,480 mm, height when open: 5,250 mm (from the base platform). Deflection from the center of the rail +/- 500 mm
131.5.2 Extension with guide roller for two (2) wires/cables, 1.375 mm for option.
131.1.2: total height when open 6.625 mm (mandatory 131.1.2) Swing movement from center +/- 800 mm, suitable for two work groups
131.7 Telescopic portal mast with two (2) cylinders and two (2) horizontal rollers. Closed height 2,600 mm, open height 4,100 mm (from the platform base)
038.9.A1 Radio remote control for telescopic mast with 10 m spare cable

Other equipment:

*Lighting for working at night