Puller-Tensioner 100 kN for 2 wires OMAC Italy F120.AF.100.22

211 253,93$ 211 253,93$

Puller-Tensioner F120.AF.100.22 for 2 wires

Hydraulic tensioner fit to string one or two conductors or optical fiber cables. Possibility of connecting a hydraulic stand with a drive for synchronous operation.

Winches: 4 x Ø 1500 mm
Maximum cable diameter: 2 x 42 mm

Tensioner mode:

Max. tension force: 1x 100 kN or 2 x 50 kN
Min. tension force: 2 kN
max. speed: 5 km/h

Pulling mode:

Max. pulling force: 1x 100 kN or 2 x 50 kN
Min. pulling force: 2 kN
Max. speed: 5 km/h

Available on backorder

Puller-Tensioner 100 kN OMAC Italy with 2 separate and independent hydraulic circuits.

Puller-Tensioner 100 kN from the Italian company OMAC Italy for overhead lines is characterized above all by a pair of steel capstans, multi-grooved lined with a special anti-slip material.

Hydraulic puller-tensioner adapted to pull one or two overhead wires or a ground wire and OPGW. Equipped with 2 independent hydraulic circuits. Both circuits can be used independently or simultaneously with automatic force sharing.

Equipped with a cable retraction motor for lashing and tensioning and retracting cables at a higher speed than in the standard version. Each of the circuits allows a smooth change of speed in both directions, which allows the use of one of the hydraulic circuits or both together.

Standard equipment consists of:

  • Low-force (4-20 kN) strain control device, specially adapted for fiber optics
  • Unattended load cell reading system
  • The control panel is equipped with a large, color graphic display and a USB port.

    The main functions of the port include, above all: displaying the tension force, speed and cable length in real time, maximum pulling force settings, working time display, recording and storing data on a USB memory stick.

  • Electronic instrument bypass
  • Loose disengagement (neutral) of capstans
  • Self-healing device for sagging surgery
  • Safe hydraulic brake
  • Back mounted cord guide with nylon rollers
  • Chassis with rigid axle, handbrake and detachable drawbar for slow towing on construction sites
  • Mechanical front plow and rear stabilizers
  • Anchoring and lifting accessories
  • Heat exchanger for cooling oil in the hydraulic circuit
  • One auxiliary hydraulic circuit to control 1 or 2 reel stands
  • Earth connection point.

Optional equipment:

008   – Suspension axle, air brake, drawbar and lighting for towing on the road (homologation excluded).
026   – PVC protective tarpaulin.
037   – Remote control on a 10 m cable.
038   – Radio control (max. distance 50 m).
045.2 – Automatic clamps for 2 conductors.
045.3 – Manual clamp for 2 wires.
069.5 – Electronic recorder printer with accessories.

Other cable winches and tensioners for overhead lines are available in our online shop.

Weight 5500 kg
Dimensions 450 × 230 × 280 cm


There are no reviews yet.

Be the first to review “Puller-Tensioner 100 kN for 2 wires OMAC Italy F120.AF.100.22”

You may also like…

Recently viewed

Check recently viewed products

Shopping Cart
Scroll to Top