Soil displacement hammer TERMA Max K130S – mole diameter 130mm

8 013,11$ 8 013,11$

Includes the basic set

Pneumatic mole Terma Max K130S:

–  Diameter: 130mm
–  Length: 1815mm
–  Weight: 115 kg
–  Air requirement: from 2.4 m3/min

(recommended compressor with a capacity of 3.6 m3 /min)

–  Working pressure: 7 atm
– Impact energy: 430 J
–  Impact frequency: 6 Hz

Soil displacement hammer TERMA Max K130S – mole diameter 130 mm

MAX K130S jacking mole from Terma  is the longest-produced machine, everything comes from it started.

At the beginning, it was TERMA MAX 130S, improved over the years of production, up to the currently produced model MAX K130S.

The latter modernization, produced since 2004, retained all the advantages of its predecessor, such as: very good accuracy and low operating costs, and gained higher energy and very high durability. However, thanks to a completely new solution of connecting the head with the cylinder and a new hammer.

Jacking mole designed primarily for: performing jacking independently as well as jacking with simultaneous pulling of plastic pipes (PE, PVC).

In addition, using additional accessories, you can widen the holes to a diameter of 219mm and pull in pipes with a diameter of 160mm-200mm.

However, the use of extenders is justified if the “mole” is to be used mainly for installing pipes with diameters up to 130 mm.

Main advantages:

  • TERMA’s jacking mole is primarily easy to operate and change the direction of the machine’s operation through a pneumatic valve located in the oiler
  • very high accuracy of jacking
  • high impact energy and consequently high speed of work
  • protected control hose inside the supply hose, durability and reliability of the machine

Usage is primarily:

Making jacking with a diameter of 130 mm; jacking with a diameter of 160 mm, 180 mm, 195 mm, 219 mm using reamers; pulling PE, PVC pipes directly behind the device with a diameter of 90 mm – 125 mm; pulling PE, PVC pipes using additional accessories, pipe diameters: 140 mm, 160 mm, 180 mm, 200 mm; driving steel pipes using cones: up to 323 mm in diameter.

Basic set includes:

  • jacking device (1),
  • supply and control hose, 20 m long (2),
  • control station (3),
  • hook key (4),
  • a spanner (5),
  • EkoMAX oil 5l (6),
  • LOCTITE 55 thread (7),
  • KorMAX oil 1L

24 months warranty. During the warranty period, the cost of delivering the machine to the service (via a courier company indicated by the manufacturer) is covered by the manufacturer.

More jacking moles are available in our Online shop.

Weight 140 kg
Dimensions 40 × 40 × 1900 cm


There are no reviews yet.

Be the first to review “Soil displacement hammer TERMA Max K130S – mole diameter 130mm”

You may also like…

Recently viewed

Check recently viewed products

Shopping Cart
Scroll to Top